Single Point Load Cell

The Miniature Weight Sensor LCE01-1kg is the most compact single-point load cell we offer, measuring just 20mm in length. Despite its tiny size, this sensor delivers exceptional performance, making it perfect for precision weighing in space-constrained applications. Based on proven strain gauge technology, the LCE01-1kg features an impressive non-linearity error of only 0.1% of the full scale, ensuring reliable and accurate measurements.

The Miniature Beam Load Cell LCE02 is a compact and precise single-point sensor designed using strain gauge technology, ensuring an impressive 0.1% non-linearity of the full scale. Constructed from lightweight aluminum, the LCE02 measures just 22mm in length and 5mm in height, with a weight of approximately 2.2 grams. This compact design allows it to fit seamlessly into applications with limited mounting space without sacrificing measurement accuracy or performance. The LCE02 is available in rated capacities of 2kg, 5kg, and 10kg, making it adaptable to various small-scale weighing and force measurement needs.

The Miniature Single Point Load Cell LCE04 is a highly efficient and precise weight transducer, designed to meet the needs of applications where space constraints and cost-effectiveness are primary concerns. With its compact size, lightweight construction, and low power consumption, the LCE04 is an ideal choice for weighing applications in confined spaces that require accurate measurements without exceeding budgetary limits. The load cell is available in rated capacities of 1kg, 2kg, 5kg, and 10kg, and boasts an impressive 0.05% non-linearity of the full scale, ensuring consistent and reliable readings.

The Micro Load Cell Sensor LCE05 is specifically engineered for weighing applications where limited mounting space is a constraint, yet accurate measurements are essential, all while staying within a tight budget. This miniature load cell is available in rated capacities of 300g, 500g, 750g, and 1000g, providing versatility for a range of precision measurement needs. Built on proven strain gauge technology, the LCE05 delivers high accuracy with an impressive 0.05% non-linearity of the full scale, ensuring reliable performance for demanding applications.

The LCE06-30g Single Point Load Cell is our smallest capacity load cell, offering exceptional precision and reliability for applications requiring minimal weight measurement. Built using metal foil strain gauge technology, this load cell features a 1000-ohm resistance Wheatstone bridge that is meticulously bonded onto an elastic aluminum body. This advanced design enables the LCE06-30g to deliver accurate force measurements with an impressive 0.05% non-linearity of the full scale.

The Low Capacity Weight Sensor LCE07 is a high-precision load cell designed to provide accurate weight measurements for applications that require exceptional sensitivity. Based on metal foil strain gauge technology, this sensor features a Wheatstone full bridge configuration that outputs an mV signal proportional to the applied weight or load. This design ensures precise and reliable measurements, making it ideal for applications that demand high accuracy.

The Low Capacity Single Point Load Cell LCE08 is a precision-engineered weight sensor constructed from lightweight aluminum and built using metal foil strain gauge technology. This load cell offers 1.0mV/V sensitivity, providing reliable and accurate force measurement across a range of applications. Available in rated capacities of 300g, 600g, 1kg, 1.5kg, and 3kg, the LCE08 caters to various low-capacity weighing needs, making it ideal for applications that require precise, small-scale measurements.

The small size weight sensor LCE09 is a highly reliable and accurate single point load cell, specifically designed for off-center weight measurement. This advanced load cell is manufactured using high-quality aluminum and integrates a Wheatstone full bridge circuit to deliver mV output that is proportional to the applied weight. Thanks to its meticulous corner trimming process, the LCE09 ensures consistent and uniform output regardless of the load's position on the upper platform, as long as it is within a 120x120mm area. This unique feature makes it particularly effective for applications requiring precise weight distribution and measurement, such as multi-point weighing tasks.

The single point load cell LCE11 is an advanced weighing sensor that leverages strain gauge technology and incorporates a Wheatstone full bridge configuration with a 1000-ohm resistance. This design is especially notable for its lower current consumption compared to typical 350-ohm load cells, making the LCE11 a valuable component for applications where low power consumption is essential. The cell's energy efficiency can be beneficial for battery-powered systems or other setups where conserving power is critical.

The low cost load cell LCE12 is a high-quality, affordable solution designed for precision and durability. Made from aluminum, it utilizes advanced metal foil strain gauge technology that ensures reliable performance with a maximum non-linearity of only 0.03% of the full scale. This feature guarantees accurate readings, enhancing the overall reliability of the load cell for various applications. The LCE12 load cell incorporates a Wheatstone full bridge circuit with a 2.0mV/V sensitivity, providing consistent and stable outputs essential for precise weight and force measurements.

The single point load cell LCE10 is a high-performance, strain gauge-based load cell engineered specifically for off-center load measurements. This design leverages an advanced corner correction process that ensures the sensor can deliver precise and consistent results even when the load is applied at various points on the platform, accommodating dimensions up to 250x350mm. Such adaptability is essential for applications requiring uniform weight distribution and reliable readings across larger surfaces.

The single point load cell LCE13 is engineered to deliver reliable and precise off-center weight measurement for platform sizes up to 250x350mm. Thanks to its corner trimming process, this load cell ensures uniform weight measurement regardless of the load's position on the platform. This capability allows bench scales to be constructed using only one centrally placed load cell, enhancing design simplicity and cost-effectiveness. Such a configuration is ideal for streamlining manufacturing processes and reducing material use without sacrificing measurement accuracy.

The single point load cell LCE16 is a versatile and precision-engineered weight transducer that incorporates strain gauge technology and features a Wheatstone full bridge configuration, delivering an output of 2.0mV/V. This reliable load cell is available in a broad range of rated capacities, including 3kg, 5kg, 8kg, 10kg, 15kg, 20kg, 30kg, 50kg, and 100kg, making it adaptable to a wide array of weighing applications from light to medium loads. Its design is based on the parallel bending beam working principle, rendering it moment insensitive and ensuring that weight measurements remain unaffected by off-center load applications.

The weight cell sensor LCE18 is expertly engineered to provide reliable and accurate weight measurements, even when loads are applied at various positions on the platform. This precision is achieved through its advanced off-center load compensation process, making it ideal for scales that require only one sensor centrally placed under the platform. This capability not only simplifies the design but also ensures cost-effective scale construction by eliminating the need for multiple sensors while maintaining high accuracy.

The weighing load sensor LCE19 is designed to offer exceptional off-center loading compensation and is moment insensitive, meaning it delivers accurate readings regardless of where the load is placed on the platform. This crucial feature allows for the construction of platform scales using only one centrally located load cell, supporting platform sizes up to 400x400mm. This simplifies the design process and reduces the number of components needed, which helps lower costs and streamline installation.

The strain gauge load cell LCE17 is a highly capable and reliable weighing solution designed to provide exceptional off-center loading compensation. This feature ensures that the load cell can deliver consistent and precise measurements, regardless of where the load is positioned on the platform, making it suitable for platforms as large as 400x500mm. This capability allows for the construction of platform scales using just one centrally arranged load sensor, streamlining the design and reducing the need for multiple sensors, which can simplify both installation and maintenance.